Skip to content

Heat Treatment

No chemicals, no gas residue and no waiting time for degassing — documented heat treatment for your pallets, wood packaging and cargo.

Heat treatment (HT) eliminates pests by raising the material or cargo to a set temperature and holding it there long enough. Because no chemicals are used, it is environmentally friendly, leaves no residue and needs no degassing time afterwards.

Its most common use in international trade is ISPM 15: in many countries, wooden pallets, crates, cases and dunnage used for export must be heat treated and marked. Heat treatment is also one of the main accepted methods for BMSB (brown marmorated stink bug) season shipments of machinery, vehicles, metal products and containers to Australia and New Zealand.

Fumpest carries out every type of quarantine treatment, but when the cargo allows, heat treatment is our first choice. From our base in Bursa we work at every port in Türkiye — from Gemlik to Mersin — plan around your vessel cut-off and deliver complete paperwork backed by temperature records.

How we do it

  1. Step 01

    Goods & requirement review

    We assess the material, wood thickness, cargo volume and destination rules to set the treatment parameters.

  2. Step 02

    Sensor placement

    Temperature probes are placed where heat arrives last — the core of the thickest timber and the centre of the load.

  3. Step 03

    Heating & holding

    The load is heated until every probe reaches the target temperature, then held there continuously for the required time.

  4. Step 04

    Logging & verification

    Time–temperature data is logged throughout and the records confirm the parameters were met.

  5. Step 05

    Certification

    We issue a heat treatment certificate and a report with the temperature records, and apply ISPM 15 marking to wood packaging where required.

What you receive

  • Heat treatment certificate (date, temperature and duration)
  • Time–temperature records and photo-documented report
  • HT marking for wood packaging within the scope of ISPM 15

Questions about this service

What is ISPM 15 heat treatment?

ISPM 15 is the international standard that stops wood packaging (pallets, crates, dunnage, etc.) from spreading pests in international trade. In heat treatment (HT) the core temperature of the wood is raised to at least 56 °C and held there for at least 30 continuous minutes. Treated packaging is stamped with the IPPC mark.

Should I choose heat treatment or fumigation?

Heat treatment uses no chemicals, leaves no residue and needs no degassing afterwards, so it is our first choice for many shipments. If the cargo cannot take heat or the destination requires a different method, we fumigate instead. We choose the right method for your cargo with you.

Is heat treatment accepted for the BMSB season?

Yes. Heat treatment is one of the methods Australia and New Zealand accept for the BMSB season. Parameters and loading time limits are published by the authorities every season, and we plan each treatment against the current rules.

Which ports do you cover?

Based in Bursa, we serve every port and loading point in Türkiye, including Gemlik, Ambarlı, Kocaeli, İzmir and Mersin.

Quote

Request a quote for this service

Fill in the form and our team will get back to you shortly during business hours.

Contact channels

Service(s) you need (required)

You can select more than one.

required

Get a Quote